Home » Plumbing

Category Archives: Plumbing

Recent Posts

Gas Piping System Safety and Inspections

Gas piping systems carry gas and heated water. The piping system includes shut-off valves and flexible connectors to reach appliances far away. Flexible connectors provide an extra layer of safety against potential gas leaks during earthquakes. Gas piping systems must be properly designed and constructed to ensure safety and prevent cracks from forming. Professionals helps you choose the right materials for pipes and strong structural support for safety. Safety is also determined by the quality of gas that is used in the system.

piping inspection

A gas piping system must withstand a pressure test of three PSIG or six inches of mercury. This pressure must be measured using a mercury manometer or slope gauge or an equivalent device. The test should be performed in 0.1-PSIG increments. Newly installed branches must be tested based on these standards. Once installed, a gas piping system must be tested to ensure it meets the minimum safety standards. The following steps are helpful in choosing the right gas piping system for a building.

After completing a Gas Piping System Periodic Inspection Certification, the building owner must submit it to the Department of Buildings (DOB) for approval. The LMP must sign the form and certify any conditions noted in the GPS1 report that is necessary for the building to be compliant with Construction Codes. Failure to submit this form will result in a civil penalty of $5,000. You should consider hiring a gas piping inspection company when planning to build a new building or renovate an existing building.

Before completing your Gas Piping System Periodic Inspection, you must hire a qualified Licensed Master Plumber (LMP). The LMP must sign and confirm the form on behalf of the owner. The inspection must be done every four years or by the end of the applicable inspection date range. Licensed master plumbers must complete these inspections. For building owners with no gas piping, the process will be much simpler. The inspection is usually completed by a licensed LMP and is not too expensive.

Periodic inspections are required every four years. Gas piping inspections must be performed by a Licensed Master Plumber or by a “direct and continuing” licensed plumber. If you hire a Licensed Master Plumber to inspect your Gas Piping System, the DOB encourages you to check their license status and disciplinary history. If they have a criminal record, you should not use them to conduct your Gas Piping System inspection.

Installing a CSST requires some extra work. It is installed by a qualified professional and should be bonded to electrical service. CSST is not suitable for use in a high-rise building. Therefore, it is important to hire a licensed professional to ensure your safety. You should install the system according to the manufacturer’s design guide and local codes. The flexible connectors must be installed at a minimum of six inches from the grade.

Natural gas has a specific gravity of 0.60, and you can calculate your desired pressure drop by dividing the connected load in BTUs by 2,500 or 3,200. A similar calculation applies to butane systems, where you must multiply the BTU by the length of the piping system. The inside pipe diameter is then figured using the desired pressure drop and the gas pressure. Finally, you should choose the right pipe size according to the specifications set forth by the gas utility.

A pulsation study is another important consideration when planning a process gas piping system. Pulsation studies can prevent the piping from bursting due to stresses. This failure can lead to process gas release. Higher power reciprocating compressors pose a challenge when it comes to designing skid stiffness. Proper skid stiffness will help maintain alignment even during transport. However, alignment will always be a part of commissioning, and will likely require a little adjustment.

Plumbing Issues – Repair Them The First Time

One of the most common plumbing issues people have is broken pipes. Most of us are not so lucky when it comes to fixing our own plumbing problems but hiring a plumber is always a good idea. Sometimes we have a tough time fixing the problem on our own, and therefore we should call a plumber, who will fix the pipes for us. Calling a plumber is also very important as ignoring the problem can lead to bigger problems. Some of the common plumbing problems you will hear about include burst pipes, slow-flowing pipes, and damaged pipes, etc.

Let us first talk about burst pipes. If your home has a running toilet and you notice that the toilet is leaking from the bottom, then the chances are that there is a broken pipe somewhere in your home’s plumbing system. This is why calling a plumber is extremely important as they will ascertain whether the pipe is running under the floor or at ground level. They will be able to repair the pipe using high-tech equipment. If the pipe cannot be repaired and needs to be replaced, your plumber will be able to recommend a proper solution for your plumbing issues.

Another common plumbing issue that people face is slow-flowing pipes. The biggest reason behind this is inadequate water pressure. For small houses, increasing the water pressure by one percent will do the trick. However, if you live in a house with big water pressure, you will have to pay a big amount of money to fix your pipes. This is why you should hire a plumber to do all the plumbing work for you.

Leaky pipes. Another common plumbing problem faced by people is a leaky tap or a leaking water heater. For both of these issues, there are simple solutions that do not require much work. For instance, if you find a hole in the wall, all you have to do is fill it with some filler and put new tiles over the hole to make it waterproof again. Or, if you have a leaking water heater, you can place some absorbent pads around the area and make sure that the clog is fixed before it leads to a bigger problem.

Toilet clogs. Another common plumbing issue is toilet clogs. Sometimes these plumbing problems can be solved with minimal effort on your end. However, most of the time, they require plumbing repair or a plumber. If the toilet clog is not fixed the first time properly, you can spend more money because it can lead to a blockage. Therefore you must let a professional plumber remove all the clogs in your toilet and make it unclogged once and for all.

Ducts and pipe leak. Another plumbing issue that people usually face leaks in their ducts and pipes. These leaks are quite easy to fix with the right tools but can turn into big messes if you are unsure how to go about it. Hence you must let a professional plumber fix these problems for you because the last thing you want is for something to happen to your property. After all, you did not know about it. Leaks happen quite commonly in homes, and a professional plumber can easily locate where the leak is coming from and fix it for you.

Water pressure issues. Another plumbing problem that we face at home is low water pressure. This can happen due to several reasons, but the most common reason is a clogged toilet. If you have a clogged toilet, it will take more water to flush the toilet than it should. This will then lead to water pressure issues, and it could even cause your electricity bill to go up.

So, if you have any of the plumbing issues listed above, don’t worry. Grand Prairie Plumbers can easily repair the issue for you and ensure that all the pipes work the way they should be. If you have faucets that leak or plumbing problems, let a plumbing repair specialist deal with the problem for you.

What Causes Pipe Blockages? Know-How to Prevent Them

Pipes are an essential part of our daily lives, so it becomes crucial to maintain them properly. Unfortunately, not all pipes are of the same quality. In fact, there are different kinds of pipes used in different parts of our homes. And it is only when we encounter problems with the pipes at home that we realize how much they affect our daily life. Therefore, if you also have a problem with your pipes at home, it will be better to learn about some methods to get your pipes fixed and cleaned, so that future problem with them does not occur.

Firstly, you need to determine what type of blockage has occurred in the pipes so that you can make the necessary repairs. For example, you might have a blockage in the bathtub, and it might just be caused by tiny hair or dirt being caught in the trap. If you do not fix the problem right away, the blockage will continue to build up and eventually break free of its own accord.

Secondly, you can use certain tools to see what the problem is. A plunger works well in determining whether a certain part of the pipe is blocked or not. You can easily push the plunger up and down to see whether the blockage is indeed present. If the blockage is present, then you will know what to do about it.

Thirdly, you can open the tap of the blocked pipe to release the blockage. However, it might not be possible to do this when the blockage is located in a tiny area. Or if you are not very strong in lifting weights. Therefore, you can either call a plumber or use some tools to remove the blockage. The pressure from the water will also help you lift the blockage.

Fourthly, you can use compressed air to get rid of the blockage. However, this might not be effective if you have no idea where the pipe is blocked. Therefore, in such cases, you should call the plumber. He will definitely be able to locate the pipe that is causing the problem. You might even be able to get the pipe without any damage by pushing it aside with the help of a pipe wrench.

Fifthly, it would be best if you tried to determine where the cause of the blocked pipe is. You have two options in doing so. First, you can wait for the water to drain by itself once it gets stuck in the pipe. Second, you can use a forced air pump device to force the water out of the pipe. Once this is done, you will be able to determine the cause of the blocked passage.

Sixthly, it would help if you tried to get the pipe manually unclogged. This is the easiest way to unclog a pipe. You will have to open it with the help of a wrench or a pipe wrench. However, it might be difficult to reach some areas of the pipe.

By observing these simple steps, you will surely be able to get your pipe running smoothly again. Moreover, you will be able to prevent your family and friends from getting seriously injured when a pipe becomes blocked. In fact, most people have been reported to be seriously injured due to this reason. Hence, if you want to avoid serious injuries, you should do all these things at the earliest.

There are many ways in which you can deal with a blocked pipe. First of all, you should observe the cause of the blocked passage before taking any action. For instance, you should try to find out why the pipe has become blocked in the first place. If you do not know the exact reason for the blockage, you should contact a plumber immediately. By doing so, you will be able to prevent further damage to the pipe.

Secondly, if you do not know how to address the problem yourself, you should contact Plumber Van Nuys. On the other hand, if you do not have the time to deal with such matters, you should get in touch with qualified professionals. However, it would be best to keep in mind that hiring professionals might cost you some money. Hence, if you feel that you cannot afford to pay some extra amount to a plumber, you should contact the nearest hardware store for repairs.

Finally, the best way to deal with the blocked pipe is to prevent the same from happening in the future. It would help if you remembered never to let any of your pipes dry out. You can achieve this by regularly taking good care of the drainage system. Similarly, you should avoid using oil or grease when washing utensils or cleaning the inside of the house. In short, if you do not let your pipes dry out, you will never have to face the problem of blocked pipes.